1/4", 3/8", 1/2"

1750 Series Pilot operated Poppet Valve - Small Midland ACS logo

Midland-ACS range of 3/2 pilot solenoid operated poppet valves in stainless steel 316L for use on gases.

Features and Benefits:

  • Specifically designed for severe environments
  • Ambient temperature range -20 ºC to +180 ºC (valve only - see solenoid specification chart for details)
  • 316L stainless steel construction
  • Designed for actuator control
  • Large flow paths (up to 110 Cv)
  • NACE capability option available

Working Temperature Range:

  • 1/4" to 1/2" -20 °C to +180 °C (-4 °F to +356 °F)
  • Low temperature option available -50 °C (-58 °F) - solenoid fitted (consult Rotork for product codes)

Working Pressure:

  • Up to 12 bar (174 psi) maximum inlet pressure
  • Minimum pilot pressure valve size dependent

Ports NPT (BSP Option Available):

  • 1/4" to 1/2" NPT
  • Pilot ports 1/8" or 1/4" (valve size dependent)

Operating Media:

  • Gases – filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases - NACE
  • Liquids – low pressure hydraulic, mineral oil or water (please consult Rotork)

Construction Materials:

  • Body & trim: 316L stainless steel
  • Springs: 316 stainless steel
  • Seals: 1/4" to 1/2" fluoroelastomer

1/4", 3/8"” and 1/2" Pilot Solenoid Poppet Valves have internal feed to solenoid, therefore can only be used 3/2 Normally Closed. If Normally Open or Separate Pilot Supply is required please consult Rotork.

See Rotork Midland Poppet Valve Catalogue for further details

1750 Series Pilot operated Poppet Valve - Small Midland ACS logo